Helpline:216.771.8265

Request Quote

Brass Non-Locking
Diesel Fuel Cap –
2.00″ Diameter

FC1009

Additional information

Weight 1.0 lbs
Dimensions 2.0 × 2.0 × 2.0 in
Material

Diameter Nominal

2.00"
Male/Female

Threads Per Inch

Locking

Vented

No
Request Quote

Description

The FC1009 is the straightforward option in Cleveland Tank’s brass fuel cap lineup — no lock, no venting, just a heavier-duty material where a standard aluminum cap wouldn’t hold up as well. Brass adds rigidity and weight that some fuel systems and applications call for specifically, without the added cost of a locking mechanism you may not need.

It’s sized at 2.00 inches in diameter with an 11.5 TPI female thread, the same fitment as Cleveland Tank’s locking brass cap in this size (FC1012), so it’s a direct swap wherever brass is the required material but a keyed closure isn’t.

You may also like…

  • Brass Non-Locking <br/> Diesel Fuel Cap - <br/> 2.50" Diameter

    Brass Non-Locking
    Diesel Fuel Cap –
    2.50″ Diameter

    The FC1014 from Cleveland Tank is a brass diesel fuel cap sized at 2.50 inches in diameter, filling the gap between Cleveland Tank’s smaller 2″ and larger 3″/4″ caps. It has a female thread design at 8 threads per inch (8 TPI), non-locking and non-vented, built from brass for extra rigidity and durability over a standard aluminum cap. It resists leaks, cracks, and fuel contamination, and holds up well to repeated fueling cycles and rough handling. At 1.0 lb and 3.0 x 3.0 x 2.0 inches, the FC1014 is a direct-fit replacement for diesel fuel systems specifying a 2.50-inch, 8 TPI female-thread brass cap.

  • Brass Non-Locking <br/> Diesel Fuel Cap - <br/> 2.125" Diameter

    Brass Non-Locking
    Diesel Fuel Cap –
    2.125″ Diameter

    The FC1010 from Cleveland Tank is a vented brass diesel fuel cap with a male thread design, for fuel tank necks that take a male-threaded cap rather than the female style used on most of Cleveland Tank’s other caps. It has a 2.125-inch diameter and 12 threads per inch (12 TPI), non-locking, and vented so the tank can properly equalize pressure as fuel is drawn down instead of risking vacuum lock. Brass construction adds durability and rigidity over a standard aluminum cap. At 1.0 lb and 2.125 x 2.125 x 2.0 inches, the FC1010 is a direct-fit replacement for diesel fuel systems specifying a 2.125-inch, male 12 TPI vented brass cap.

  • Brass Locking <br/> Diesel Fuel Cap - <br/> 2.125" Diameter

    Brass Locking
    Diesel Fuel Cap –
    2.125″ Diameter

    The FC1015 from Cleveland Tank is a brass locking diesel fuel cap with a male thread design, for fuel tank necks that take a male-threaded cap rather than the female style used on most of Cleveland Tank’s other caps. It has a 2.125-inch diameter and 12 threads per inch (12 TPI), and it’s both locking — deterring fuel theft and tampering — and vented, so the tank can equalize pressure properly as fuel is drawn down instead of risking vacuum lock. Brass construction gives it more heft and durability than Cleveland Tank’s standard aluminum caps. At 1.0 lb and 2.125 x 2.125 x 2.0 inches, the FC1015 is a direct-fit replacement for diesel fuel systems specifying a 2.125-inch, male 12 TPI locking vented cap.

  • Brass Locking <br/> Diesel Fuel Cap - <br/> 2.00" Diameter

    Brass Locking
    Diesel Fuel Cap –
    2.00″ Diameter

    The FC1012 from Cleveland Tank is a brass locking diesel fuel cap, built from a heavier, more rigid material than Cleveland Tank’s standard aluminum caps for applications where extra durability matters. It has a 2.00-inch diameter and female threads at 11.5 threads per inch (11.5 TPI), and it’s both locking and vented — the integrated lock secures the tank against theft and tampering while the vented design lets the tank equalize pressure properly as fuel is drawn down. Two keys ship with every cap. At 1.0 lb and 2.0 x 2.0 x 2.0 inches, the FC1012 is a direct-fit replacement for diesel fuel systems specifying a 2.00-inch, 11.5 TPI brass locking vented cap.